PC / ABS

TECHNICAL INFO:
Material: PC / ABS

Density 1.15 g / cm³

It is a mixture of polycarbonate (PC) and acrylonitrile butadiene styrene (ABS), of the
synergy of both is obtained a combination of high resistance to heat and
impacts (polycarbonate) and exceptional processability (ABS), even higher than that of
PC or ABS separately. PC / ABS printed parts will have:
-High impact resistance even at low temperatures
-High rigidity
-Low total shrinkage and high dimensional accuracy
This material is very sensitive to humidity, which is why it is very important
keep it in an airtight container with desiccant. It is a little more prone to
warping than ABS, which requires a bed at 120 ° C, and ideally in a
printer closed. The printing temperature is 255-275 ° C.

PrintaLot®, cutting edge innovation and development. Argentina industry.

Printing Conditions

Peak Temperature: 255 ° - 275 °
Bed Temperature: 100 ° - 110 ° C

To improve adhesion we recommend the use of PrintaLot adhesive spray.

Use in a closed printer is also recommended.

Quality assured

Own production
PrintaLot filaments are produced in Monte Grande, Argentina in its own plant. This ensures that there are no third parties involved, so quality is assured.

Raw Materials
PrintaLot PC / ABS filament is produced only with virgin raw materials of the best quality worldwide.

Packing
The filament is wound and vacuum packed as soon as it is produced, so it does not absorb moisture at any time. It is also protected in a cardboard box with heat-sealed film for additional protection.

Tolerances
Our filaments are manufactured on state-of-the-art machines, with closed-loop laser controls that verify diameter and ovalization in real time. This ensures a constant flow in the deposition of the material in the printer.

downloads

TECHNICAL DATA SHEET (TDS)

SAFETY DATA SHEET (MSDS)